Author Topic: Valve springs  (Read 7074 times)

0 Members and 1 Guest are viewing this topic.

notstock88

  • Sr. Member
  • *****
  • Posts: 171
Re: Valve springs
« Reply #15 on: February 24, 2015, 07:45:10 AM »
Great info Phil. Thanks!

TainterRacing

  • Tire Shredder
  • ***
  • Posts: 53
Re: Valve springs
« Reply #16 on: August 04, 2018, 07:37:35 AM »
I'm looking at getting new valve springs for my head. I like the Beehive ones but you need new retainers I wondered is there any good valve springs that use the stock type retainers. Just trying to keep using my titanium ones I have.

I need something that can do a lot of lift as well it's more than 600 lift my cam is

notstock88

  • Sr. Member
  • *****
  • Posts: 171
Re: Valve springs
« Reply #17 on: August 04, 2018, 09:41:26 AM »
Pretty sure those are all that’s available other than those junky Schneider “hd”

TainterRacing

  • Tire Shredder
  • ***
  • Posts: 53
Re: Valve springs
« Reply #18 on: August 04, 2018, 09:46:03 AM »
I've seen some dual spring ones that I thought were good.

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1299
Re: Valve springs
« Reply #19 on: August 06, 2018, 08:51:51 PM »
 A fella a while back was running springs for a porche 944 that fit but no idea on bind
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

TainterRacing

  • Tire Shredder
  • ***
  • Posts: 53
Re: Valve springs
« Reply #20 on: August 06, 2018, 10:30:35 PM »
What is the Max lifts before bind on the beehive Springs.

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1299
Re: Valve springs
« Reply #21 on: August 08, 2018, 08:26:53 AM »
Tye sent this
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

wrngwae

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 205
Re: Valve springs
« Reply #22 on: August 10, 2018, 06:05:17 AM »
That is the sheet I got with the beehive springs off eBay.
1989 Conquest. motor built by DAD .20 over block. Wiseco pistons. new m26 head w/ ss valves. Holset Hx35 at ??psi, hurricane MPI intake manifold. 75lb injectors. meth injection, 3" exhaust. 3bar map sensor. Ajusta Head gasket. ARP head studs. FIP updated by Scott87star

PSU_Crash

  • Tire Shredder
  • Posts: 82
Re: Valve springs
« Reply #23 on: September 09, 2018, 09:28:15 AM »
Just to add another option. I am currently running Isky V-005D springs.
125lb seat, coil bind at .630

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1299
Re: Valve springs
« Reply #24 on: September 09, 2018, 10:43:38 AM »
I was wondering if anyone else ran the iskys
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1299
Re: Valve springs
« Reply #25 on: September 10, 2018, 03:24:39 PM »
What is your install height? I thought the V005D had a lower seat pressure?
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

PSU_Crash

  • Tire Shredder
  • Posts: 82
Re: Valve springs
« Reply #26 on: April 15, 2019, 07:41:59 PM »
Putting a new head together with these springs so I'll measure the height soon.

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1299
Re: Valve springs
« Reply #27 on: April 15, 2019, 09:13:17 PM »
You running the iskys?
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

PSU_Crash

  • Tire Shredder
  • Posts: 82
Re: Valve springs
« Reply #28 on: April 15, 2019, 09:22:58 PM »
That's the plan. Wish I had a way to measure seat pressure. I can measure installed height and shim if need be.