Author Topic: 4G54 intake manifolds  (Read 21380 times)

0 Members and 1 Guest are viewing this topic.

C89ZX7R

  • Sr. Member
  • Posts: 228
  • BANNED
Re: 4G54 intake manifolds
« Reply #15 on: March 04, 2014, 08:59:15 PM »
Which is better? Magna or Hurricane?
"Everyone knows the price of something but the value of nothing!"
Mods I Created "1g Maf On The Stock Harness" - "Datsun Brake Reservoir's On The Stock Master" - "Dsm Clutch Reservoir On The Stock Master"

TainterRacing

  • Tire Shredder
  • ***
  • Posts: 53
Re: 4G54 intake manifolds
« Reply #16 on: March 05, 2014, 10:10:38 PM »
mm I am not sure I personally would over thos 2 run the magna. But I don't think it would be a big diff. Now with that said I think there are a few others that out perform both of them for power but just for a street driving car the magna is a great setup get a lot of tq with it. But will suffer a bit on the high rpms.. say like 6.5K+ I think you would see gains on some of the other intakes out there. Magna has more of a stock look for sure I have had many think it was stock.

bjoh

  • Burnout
  • Posts: 1
Re: 4G54 intake manifolds
« Reply #17 on: June 25, 2014, 03:36:18 PM »
Hi does any one know where I can buy an inlet manifold to fit a Chrysler conquest 4g54? The on I am after is the 4 port onto 2 runners into the throttle body mount. My contact email is bjoh172@bigpond.com and I am from Australia. Any help would be nice, thankyou Bruce.

Rob88Starion

  • OverBoost
  • Posts: 12
Re: 4G54 intake manifolds
« Reply #18 on: October 08, 2014, 08:40:37 PM »
Anyone know if the Hurricane is still available? I have the motor out now and would like to check into it. If not, what fuel control needs to be used for multi?
88 Starion 5spd mostly stock. Can always be better!

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1297
Re: 4G54 intake manifolds
« Reply #19 on: October 08, 2014, 09:56:26 PM »
Megasquirt is the weapon of choice but alot have also used AEM PnP for DSM's. Hurricane is no longer made but I would be willing to sell mine. It has been modified for better coolant flow.
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

Rob88Starion

  • OverBoost
  • Posts: 12
Re: 4G54 intake manifolds
« Reply #20 on: October 13, 2014, 07:24:49 PM »
I'm interested. I just found a gentlemen who has Magna but unwilling to part with it. Can you show some pictures? Or pm me with info
88 Starion 5spd mostly stock. Can always be better!

non-intercooled flatty

  • Tire Shredder
  • ***
  • Posts: 58
Re: 4G54 intake manifolds
« Reply #21 on: November 16, 2014, 01:02:27 PM »



There ya go, twin skyline throttle bodies.  Perfect fit!  Trouble is finding skyline throttle bodies.  I like how he hid the injectors, rail and throttle cable underneath.  Needless to say its not A/C compliant.
The White Bear - MPI fatty
Oscar - TBI flatty
85.5 - yet to be named, yet to even run

mbruneaux

  • Spoolin
  • Posts: 2
  • 12 month project now on month 47 and only 75% done
Re: 4G54 intake manifolds
« Reply #22 on: November 22, 2017, 09:05:42 AM »
Of course the benefits of any of these intake depends on tuning but overall do MPI intakes give much more of a HP increases and less of a torque increase due to the longer intake runners?  I've read that a Caravan intake can be worth 30HP but what about torque. Thanks, great resource.
1989 Conquest TSi - trying to find the time.