Author Topic: Rat Terd  (Read 13559 times)

0 Members and 1 Guest are viewing this topic.

intercooledflatty

  • Tire Shredder
  • ***
  • Posts: 57
Rat Terd
« on: May 26, 2016, 10:32:46 AM »
with all the fukkin rat shit in the open boxes i found it made me think to name this project the Rat Terd.
thank you Larry for the hook up on this cool project, and i'm ready to put it all together to see what it can do. i will no doubt need help along the way with this MPI MS1 shit and i can't think of a better place to ask.  Scott says he did this :  MS1, VR input, dual coil out for waste spark, launch control, boost control, idle control, shift lights.
when i get it all sorted out i'll post pics to see if u doods think i need anything.

wrngwae

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 206
Re: Rat Terd
« Reply #1 on: May 26, 2016, 11:21:42 AM »
Let us know what ya need man. There are a lot of good people here for MPI projects.
1989 Conquest. motor built by DAD .20 over block. Wiseco pistons. new m26 head w/ ss valves. Holset Hx35 at ??psi, hurricane MPI intake manifold. 75lb injectors. meth injection, 3" exhaust. 3bar map sensor. Ajusta Head gasket. ARP head studs. FIP updated by Scott87star

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Rat Terd
« Reply #2 on: May 26, 2016, 12:49:51 PM »
Your gonna need a exhaust manifold, bigger intercooler, 6bolt rear, auto swap, prolly a new coil pack, baffled oil pan, nitrous, a second turbo, slicks, pumps, fiberglass front end, 25.1 chassis, niel chance convertor, nitrous, another turbo, and a Honda B18
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

intercooledflatty

  • Tire Shredder
  • ***
  • Posts: 57
Re: Rat Terd
« Reply #3 on: May 26, 2016, 01:16:49 PM »
sounds good Funk Master... how much i owe ya ?  8)

intercooledflatty

  • Tire Shredder
  • ***
  • Posts: 57
Re: Rat Terd
« Reply #4 on: May 26, 2016, 01:31:02 PM »
look at this


can it hold 25 PSI ? or should i plan a swap now ?  :'(

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Rat Terd
« Reply #5 on: May 26, 2016, 05:14:17 PM »
Id disassemble and power clean every thing. But thats just me.
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

intercooledflatty

  • Tire Shredder
  • ***
  • Posts: 57
Re: Rat Terd
« Reply #6 on: May 27, 2016, 08:41:31 AM »
i'm not concerned about the dirt, it's the scars that scare me. hope they aren't any cracks under em..... crack kills  ;D

cyberquest

  • Tire Shredder
  • ***
  • Posts: 88
Re: Rat Terd
« Reply #7 on: May 27, 2016, 08:59:57 AM »
given the bank roll your rocking you might as well rebuild it and have them gold plate it while your at it..... ;D

1984 Dodge Conquest 58,000 miles, all original.

intercooledflatty

  • Tire Shredder
  • ***
  • Posts: 57
Re: Rat Terd
« Reply #8 on: May 27, 2016, 10:38:21 AM »
lmmfao dood u think i'm rich or something, i have to sell shit to buy shit to make things happen

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Rat Terd
« Reply #9 on: May 27, 2016, 11:39:13 AM »
i'm not concerned about the dirt, it's the scars that scare me. hope they aren't any cracks under em..... crack kills  ;D

Just ull it apart and run a ballhone through it. Those scars are from trash in there. Not saying it isnt possible but Ive never seen the cylinders crack from an origination point other than from the deck.
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Rat Terd
« Reply #10 on: May 27, 2016, 11:39:45 AM »
lmmfao dood u think i'm rich or something, i have to sell shit to buy shit to make things happen

Thats exactly what I do.
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

intercooledflatty

  • Tire Shredder
  • ***
  • Posts: 57
Re: Rat Terd
« Reply #11 on: May 27, 2016, 02:18:11 PM »
Larry says this is a fresh 30 over rebuild, i was only concerned about the scars, possible cracks. the funk ( lolZZZ ) is from sittiong around in the shop with no cover. i would HOPE it wasn't turned over with all that debris in the cylZ .
fuck it, i'll clean the fuck outta it and slap the whore together, worse case it BOOMZ ! ...fukkin terd

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Rat Terd
« Reply #12 on: May 27, 2016, 03:50:29 PM »
Paint that sucker doodoo brown
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

intercooledflatty

  • Tire Shredder
  • ***
  • Posts: 57
Re: Rat Terd
« Reply #13 on: May 27, 2016, 04:47:40 PM »
 ;D FUCK PAINT... RATS DON'T DESERVE PAINT

intercooledflatty

  • Tire Shredder
  • ***
  • Posts: 57
Re: Rat Terd
« Reply #14 on: May 27, 2016, 04:48:20 PM »
and who fukkin touched my work computer with cap lock on