Author Topic: Joes Bad Flatty Bobatty!  (Read 2552 times)

0 Members and 1 Guest are viewing this topic.

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Joes Bad Flatty Bobatty!
« on: March 26, 2018, 03:35:29 PM »
Showed up this past weekend to handle the microsquirt install.
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

wrngwae

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 206
Re: Joes Bad Flatty Bobatty!
« Reply #1 on: March 30, 2018, 09:21:06 AM »
find any smoking guns yet?
1989 Conquest. motor built by DAD .20 over block. Wiseco pistons. new m26 head w/ ss valves. Holset Hx35 at ??psi, hurricane MPI intake manifold. 75lb injectors. meth injection, 3" exhaust. 3bar map sensor. Ajusta Head gasket. ARP head studs. FIP updated by Scott87star

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Joes Bad Flatty Bobatty!
« Reply #2 on: March 31, 2018, 02:24:15 AM »
Havent touched it
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

wrngwae

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 206
Re: Joes Bad Flatty Bobatty!
« Reply #3 on: March 31, 2018, 09:11:04 AM »
lol i know you did an oil flush.
1989 Conquest. motor built by DAD .20 over block. Wiseco pistons. new m26 head w/ ss valves. Holset Hx35 at ??psi, hurricane MPI intake manifold. 75lb injectors. meth injection, 3" exhaust. 3bar map sensor. Ajusta Head gasket. ARP head studs. FIP updated by Scott87star

intercooledflatty

  • Tire Shredder
  • ***
  • Posts: 57
Re: Joes Bad Flatty Bobatty!
« Reply #4 on: April 09, 2018, 10:54:43 PM »
fukkin flatty bra  :-*

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Joes Bad Flatty Bobatty!
« Reply #5 on: September 20, 2018, 12:10:04 PM »
On my ass so thought id catch up some things.

Joe's flatty Nobatty arrived non running. Unfinished Microsquirt install.

In this case I pulled everything back out so could easily go through it. Things improperly wired etc...

Rewired MS
Rewired fuel pump
added IAC & Boost Control
Rebuilt injectors (by FIC)
New starter
New viscous clutch & fan
Match ported intake
Dyno/Street Tune

87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Joes Bad Flatty Bobatty!
« Reply #6 on: September 20, 2018, 12:16:47 PM »
Also add boost control, idle control, OE oil press/water temp. Made a new crank trigger mount. Also utilizing some auto-reset breakers for the first time so Ill be interested in how they hold up.
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Joes Bad Flatty Bobatty!
« Reply #7 on: September 20, 2018, 12:19:11 PM »
Had some help pulling the cluster and doing some labels.
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Joes Bad Flatty Bobatty!
« Reply #8 on: September 20, 2018, 12:23:54 PM »
I pulled intake to add IAC valve and didnt like what I found. This was filthy on the inside. So cleaned up the intake as best i could. Thats a lot of RTV on the Tbody.
87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD

FunkyPhil

  • Administrator
  • Hero Member
  • *****
  • Posts: 1306
Re: Joes Bad Flatty Bobatty!
« Reply #9 on: September 20, 2018, 12:26:41 PM »
Joes 85 Flatty


87 Conquest Tsi: 519whp 519wtq 7.09@102--10.95@122
CLICK TO SEE BUILD