Marks 88

[FunkyPhil]

When I first saw this car it was RUFF! Long story short, Mark knows his shit and along with his son, stripped a running 88 SHP to bolts and chopped, straightened and began building probably one of the nicest Conquests you will see.

They brought me on to build them a motor, and install it along with everything needed to make it move around as it should. So I did stuffs.

[FunkyPhil]

Heres what was done
Mitsu G54B
-.020 Wiseco Forged Pistons
-"race prepped" rods
-No B/S
-Funk Lock
M28 street ported head
-ARP insert washers & studs
-Beehive springs
-FunkLab custom camshaft
-Mookeeh cam gear
Aurora Fuel Reactor (AFR) ECU
Streetfire CDI
Blaster SS Coil
Streetfire Wires
NGK 7031's
Modified Magna Intake
-65mm TB
Walbro Pump
Aeromotive Regulator
ID1000's
Stock exhaust manifold
HX35 12cm^2
Tial 38mm wastegate (vented)
2.5" Intercooler system
CXRacing Intercooler
Griffin Radiator
ACT Xtreme Pressure Plate
ACT HD Organic Disk
Fidanza FW
Stock 5 spd
Stedebani Short shifter

[FunkyPhil]

odds and ends

[FunkyPhil]

New intercooler tubes

[FunkyPhil]

Had issures making it work with the pre-existing caravan pickup. My stubbornness cost about a 3 weeks of chasing shit that wasnt there like possible vac leaks, electrical, incorrect valve timing, incorrect dist timing.....
Anyways changed back to oem VR and problem was fixed.

Mark picked it up Tuesday and they are finishing off the chassis.

Once my foot is healed enough, Gonna switch to crank trigger and then tune it.